Gold Member Since 2009
Audited Supplier
Nanjing Nianda Furnace Science and Technology Co., Ltd.

Heating Furnace, Furnace, Oven manufacturer / supplier in China, offering Double Car Bottom Heating Furnace, Bogie Hearth Aging Furnace, Suspansion Chain Type Half-Axle Quenching And Tempering Furnace (Industrial Furnace) and so on.

(/ )

Double Car Bottom Heating Furnace

FOB Price: US $150,000 / Set
Min. Order: 1 Set
Min. Order FOB Price
1 Set US $150,000/ Set
Get Latest Price
Production Capacity: 1-15
Transport Package: Steel Sheet
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: ND-AF-1000
  • Usage: Steel Molding
  • Trademark: Nianda
  • Origin: Jiangsu, China
  • Type: Industrial Furnace
  • Fuel: Gas
  • Specification: Custom Design
  • HS Code: 8514901000
Product Description
1. Equipment Purpose and Composition
This gas-fired double bogie car bottom furnace is mainly designed for stress relieving, annealing, normalizing and tempering of alloy steel parts and forged part and so on. It consists of 1 heating furnace, double door and lifting devices, double bogie and travelling devices, sealing device, combustion device, exhausting system, and electrical control system.

3.1   To ensure the uniform heating of workpieces, the only way is to improve the temperature uniformity of the furnace chamber by the well arrangement of burners. Usually, the burners shall be well arranged at the lower part of both sides of the furnace.

3.2    To rise the temperature rapidly, save energy, improve control sensitive, the lining adopts refractory fiber which featured with the following characteristics:
a. Light weight, low heat storage, easy to control, capable of control sensitivity;
b. Simple structure, easy to maintain and long service life;
c. High insulation value and low skin temperature (less than 45ºC). 
 
Bottom furnace is constructed with light weight insulation brick and high-aluminum heavy brick. And special cushion iron shall be placed on the lining for carrying the workpieces. The sealing adopts the Belgian technology, two cylinders are installed at both sides of the furnace respectively, it shall be compressed with the furnace hearth tightly through lever device.
 
3.3The sealing of door adopts Belgian technology. Loosen 4 compressing cylinders in door frame prior to open the door, the door shall be lifted up and open driven by the motor. While closing the door, fall the door in place firstly, then 4 cylinders shall be compressed tightly with the door.

3.4Furnace Body:
It is made of high quality steel plate and formed steel and welded together. Such kind of structure provides a nice appearance, high rigidity, less distortion, the service life of the furnace body is
more than 10 years. In addition, the outer surface is coated with a layer of anti-rust paint and high silver powder paint.
 
3.5Lining:
It adopts compound design where the peripheral furnace lining is made of fiber folding blocks which is a new typed energy-saving material fully. Its weight is only 1/8 of refractory bricks lining and energy saving is up to 30%. It adopts the installation method of fix the special riveted parts onto the steel plates, this structure has the best tensile strength and highest temperature resistant ability is 1460 degree, the density of folding block is 230 kg/ m3
. After the lining being made, it will be applied high temperature solidification agent to increase the surface intensity and to prevent the heat from being go through the liner. The most advantage of this structure is that it will be repaired easily after it is damaged, in which, broken folding blocks can be replaced easily, its shelf life is above 5 years.

 
3.6Combustion System:
It adopts high quality product, it is designed with motorized butterfly valve in both air line and gas line, recuperator in the piping.

     A set of recuperator is designed in the flue duct, to preheat the air to 400ºC.
     The burner shall be ignited automatically, each zone is controlled individually. There are two thermocouples, one is for temperature controlling, and the other is for recording.

3.7Bogie Device:
he bogie mainly consists of steel structure, lining and travelling device.

Steel Structure: It is made of steel plate and double beam. It is less distortion and broken, can withstand the load capacity.

Send your message to this supplier
Avatar
Ms. Tina Ma
Sales Manager
*From:
To: Ms. Tina Ma
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now